[cisco-voip] 7940 Power Save Mode

[Matthew Ballard]

The only reason the 7970 would need a power save mode is to turn off the backlight.  Since the 7940 doesn’t have a backlight, a power save mode would save little to no power anyways.

 

Matthew Ballard

 

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jamie Weatherhead
Sent: Monday, March 22, 2010 9:42 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7940 Power Save Mode

 

Afternoon all,

 

Is it at all possible to set a 7940 phone to power save mode?

 

I am able to achieve this for a 7970 phone by adjusting the ‘Display Idle Timeout’ setting on the phone device configuration page. However, the 7940 phone doesn’t appear to have these settings as seen below:

 

Any help would be appreciated.

 

Jamie


Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this. 

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/ <http://www.charles-stanley.co.uk/contact-us/disclosure/> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100322/880838ad/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 11582 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100322/880838ad/attachment.png>