[cisco-voip] 7940 Power Save Mode

[Fuermann, Jason]

I'm sure EEM has some interface a standard user could interact with

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Tuesday, March 23, 2010 9:42 AM
To: Matthew Loraditch
Cc: cisco-voip at puck.nether.net; Jamie Weatherhead
Subject: Re: [cisco-voip] 7940 Power Save Mode

You telnet in to the switch and do a 'no shut'.  We control the switches here in our cubes that power all of the phones.

-Ryan

On Mar 23, 2010, at 10:31 AM, Matthew Loraditch wrote:


How does that work if you need to work late or come in on off hours ?


Matthew Loraditch, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Tuesday, March 23, 2010 10:27 AM
To: Matthew Ballard
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>; Jamie Weatherhead
Subject: Re: [cisco-voip] 7940 Power Save Mode

We implement an alternate powersave method on the phones at our desks. We use EEM script on switch to shutdown power to all non-critical phones outside business hours.  EEM script is available in the EEM script repository on Cisco.com<http://Cisco.com>.

/Wes

On Monday, March 22, 2010 12:48:36 PM, Matthew Ballard <mballard at otis.edu><mailto:mballard at otis.edu> wrote:


The only reason the 7970 would need a power save mode is to turn off the backlight.  Since the 7940 doesn't have a backlight, a power save mode would save little to no power anyways.

Matthew Ballard


From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jamie Weatherhead
Sent: Monday, March 22, 2010 9:42 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] 7940 Power Save Mode

Afternoon all,

Is it at all possible to set a 7940 phone to power save mode?

I am able to achieve this for a 7970 phone by adjusting the 'Display Idle Timeout' setting on the phone device configuration page. However, the 7940 phone doesn't appear to have these settings as seen below:
<image001.png>
Any help would be appreciated.

Jamie

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/






________________________________






_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100323/6c72298d/attachment.html>