[cisco-voip] 7940 Power Save Mode

[Chris Ward (chrward)]

Energywise support is not yet available on our phones. You can use
Energywise to shutdown switchports, but not put the phones to sleep...
YET.

 

When energywise is supported on the phones, it will have the ability to
put them into a deep-sleep mode. It will however not be supported on the
7940/60s.

 

+Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Fuermann, Jason
Sent: Tuesday, March 23, 2010 10:53 AM
To: Fuermann, Jason; Ryan Ratliff (rratliff); Matthew Loraditch
Cc: cisco-voip at puck.nether.net; Jamie Weatherhead
Subject: Re: [cisco-voip] 7940 Power Save Mode

 

Sorry, I was thinking of EnergyWise, not EEM

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Fuermann, Jason
Sent: Tuesday, March 23, 2010 9:43 AM
To: 'Ryan Ratliff'; Matthew Loraditch
Cc: cisco-voip at puck.nether.net; Jamie Weatherhead
Subject: Re: [cisco-voip] 7940 Power Save Mode

 

I'm sure EEM has some interface a standard user could interact with

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Tuesday, March 23, 2010 9:42 AM
To: Matthew Loraditch
Cc: cisco-voip at puck.nether.net; Jamie Weatherhead
Subject: Re: [cisco-voip] 7940 Power Save Mode

 

You telnet in to the switch and do a 'no shut'.  We control the switches
here in our cubes that power all of the phones.

 

-Ryan

 

On Mar 23, 2010, at 10:31 AM, Matthew Loraditch wrote:

 

How does that work if you need to work late or come in on off hours ?

 

 

Matthew Loraditch, CCNA, CCDA
1965 Greenspring Drive

Timonium, MD 21093 
support at heliontechnologies.com <mailto:support at heliontechnologies.com> 
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com
<http://www.heliontechnologies.com/>  
Support Issue? Email support at heliontechnologies.com
<mailto:support at heliontechnologies.com>  for fast assistance!

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Tuesday, March 23, 2010 10:27 AM
To: Matthew Ballard
Cc: cisco-voip at puck.nether.net; Jamie Weatherhead
Subject: Re: [cisco-voip] 7940 Power Save Mode

 

We implement an alternate powersave method on the phones at our desks.
We use EEM script on switch to shutdown power to all non-critical phones
outside business hours.  EEM script is available in the EEM script
repository on Cisco.com.

/Wes

On Monday, March 22, 2010 12:48:36 PM, Matthew Ballard
<mballard at otis.edu> <mailto:mballard at otis.edu>  wrote:

The only reason the 7970 would need a power save mode is to turn off the
backlight.  Since the 7940 doesn't have a backlight, a power save mode
would save little to no power anyways.

 

Matthew Ballard

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jamie
Weatherhead
Sent: Monday, March 22, 2010 9:42 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7940 Power Save Mode

 

Afternoon all,

 

Is it at all possible to set a 7940 phone to power save mode?

 

I am able to achieve this for a 7970 phone by adjusting the 'Display
Idle Timeout' setting on the phone device configuration page. However,
the 7940 phone doesn't appear to have these settings as seen below:

<image001.png>

Any help would be appreciated.

 

Jamie


Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient
and may not be disclosed. Although it is believed that this email and
any attachments are virus free, it is the responsibility of the
recipient to confirm this. 

You are advised that urgent, time-sensitive communications should not be
sent by email. We hereby give you notice that a delivery receipt does
not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where
applicable), can be found at this URL
http://www.charles-stanley.co.uk/contact-us/disclosure/
<http://www.charles-stanley.co.uk/contact-us/disclosure/> 

 
 
 
 
 



________________________________



 
 
 
 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  

 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100323/08f8ba6b/attachment.html>