[cisco-voip] Multiple CM Clusters - 1 Unity system

[Matt Slaga (US)]

It is absolutely possible, however you have to carve out the Unity ports between the systems, as they cannot be shared.  I.e, if you have 32 ports and 4 systems, you could do 8 ports per system.  You also have to configure each UCM cluster in the Unity TSP .

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Micah Bennett
Sent: Friday, March 26, 2010 10:51 AM
To: cisco-voip list
Subject: [cisco-voip] Multiple CM Clusters - 1 Unity system

Is it possible for multiple CM Clusters (different Versions) to point to one common Unity Server.


Micah Bennett
Telecommunications Admin
Active Outdoors




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100326/99bfbd76/attachment.html>