[cisco-voip] SIP Trunks

[Nick Matthews]

Small correction:  the licensing matters on all platforms, as the G2
is not any different in regard to CUBE licensing.

-nick

On Fri, Mar 26, 2010 at 10:20 AM, Matthew Saskin <msaskin at gmail.com> wrote:
> The CUBE ordering guide has sizing guidelines based on platform:
>
> http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps5640/order_guide_c07_462222.pdf
>
> Also explains the licensing model for CUBE, which becomes increasingly
> important if you're going to deploy on an ISR G2 and need to have proper
> licenses in place.
> Matthew Saskin
> msaskin at gmail.com
> 203-253-9571
>
> July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
> Please support the Leukemia & Lyphoma Society
> http://pages.teamintraining.org/nyc/nyctri10/msaskin
>
>
> On Thu, Mar 25, 2010 at 9:42 PM, Daniel <dan.voip at danofive.id.au> wrote:
>>
>> Hi All,
>>
>> Can anyone provide some info on hardware specs and scale for SIP trunks?
>>
>> A list of hardware to look at that shows supported load from small sites
>> to large sites etc...?
>>
>> What is the supported size of the CUBE in different models.
>>
>> Would you use CUBE for a large deployment of SIP trunks or other
>> hardware/brand etc...
>>
>> cheers,
>>
>> Daniel
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>