[cisco-voip] 2911 VGW in CUCM 7

[Scott Voll]

yes or other apps like informacast, etc.

On Fri, Mar 26, 2010 at 7:58 AM, H, Tim <TimH at trstone.com> wrote:

>  When you say uploading new jtapi plugins, are you just talking about
> re-syncing it with UCCX?
>
>
>
> *Tim ***
>
>
>
> *From:* Scott Voll [mailto:svoll.voip at gmail.com]
> *Sent:* Thursday, March 25, 2010 1:44 PM
> *To:* ccieid1ot
> *Cc:* H, Tim; cisco-voip at puck.nether.net
>
> *Subject:* Re: [cisco-voip] 2911 VGW in CUCM 7
>
>
>
> and don't forget the dial peers.  Little more entailed.
>
>
>
> as for the upgrade from 7.0. to 7.1 it "should" be like a little Service
> pack.  Might have to upload new jtapi plugins or such, but pretty painless.
>
>
>
> Scott
>
> On Thu, Mar 25, 2010 at 10:26 AM, ccieid1ot <ccieid1ot at gmail.com> wrote:
>
> For h.323 gateway
>
> you need h323-gateway voip interface and h323-gateway voip bind source <ip>
>
> Then just add the gateway as h323, make sure you use the corresponding
> IP as the one configured in the bind source command.
>
> Don't shoot me if I get the syntax wrong.  :P
>
>
> On Thu, Mar 25, 2010 at 12:00 PM, H, Tim <TimH at trstone.com> wrote:
> > Any good documentation on setting up an H323 Gateway.  Something I've
> never done before.
> >
> > Also, is it a major upgrade from 7.02 to 7.13 or is mainly just like a
> service pack type of update?
> >
> > Thanks,
> >
> > Tim
> >
> > -----Original Message-----
> > From: Erick B. [mailto:erickbee at gmail.com]
> > Sent: Thursday, March 25, 2010 11:11 AM
> > To: H, Tim
> > Cc: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] 2911 VGW in CUCM 7
> >
> > You could also use H323
> >
> >
> > On Thu, Mar 25, 2010 at 10:09 AM, Erick B. <erickbee at gmail.com> wrote:
> >> You need to upgrade your Call Manager to 7.1.3 or 8.0 to get support
> >> for those new model routers.
> >>
> >>
> http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf
> >>
> >>
> >>
> >> On Thu, Mar 25, 2010 at 9:57 AM, H, Tim <TimH at trstone.com> wrote:
> >>> I have a problem currently.  I do not have an option for a 2911 Gateway
> in
> >>> CUCM 7.0.  How would I configure a VGW that call manager does not
> recognize?
> >>>
> >>>
> >>>
> >>> Thanks,
> >>>
> >>>
> >>>
> >>> Tim
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> cisco-voip mailing list
> >>> cisco-voip at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>
> >>>
> >>
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100326/7328c16b/attachment.html>