[cisco-voip] FXO ports and registering with CCM

[Erick B.]

The first line on 'show ccm' shows the MGCP domain name, that needs to
match the name configured on CUCM.


On Sun, Mar 28, 2010 at 9:54 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> yes, multiple IPs - so I have bound MGCP to one of the loop back addresses.
>
> it's this loop back address is the one that is allowed to TFTP to the
> callmanager.
>
> i do not have a domain configured on the router, so i should be ok.
>
> although i didn't see any registration information on a "show mgcp"
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ----- Original Message -----
> From: "Scott Voll" <svoll.voip at gmail.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net>
> Sent: Sunday, March 28, 2010 12:03:44 AM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] FXO ports and registering with CCM
>
> are there multiple IPs on the router? (if so, need to bind to IP)  hostname
> correct? (double check).
>
> Scott
>
> On Sat, Mar 27, 2010 at 5:27 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>>
>> I've finished configuring a couple of FXO port (with Ground Start) and
>> CUCM has an IP address for the ports, but they're not registered yet. I have
>> put the appropriate MGCP and ccm-manager commands based on another router
>> and CCO documents.
>>
>> I have two questions:
>>
>> should these ports register unplugged or do I have to plug in the trunk
>> line before they will register?
>> I noticed some TFTP errors on the MGCP status, I'm thinking that's not
>> good (see below config)
>>
>> ________________________________
>> !
>> voice-port 0/2/0
>>  signal groundStart
>> !
>> voice-port 0/2/1
>>  signal groundStart
>> !
>> ccm-manager fallback-mgcp
>> ccm-manager mgcp
>> ccm-manager config server 10.104.91.105
>> ccm-manager config
>> !
>> mgcp
>> mgcp call-agent 10.104.91.105 2427 service-type mgcp version 0.1
>> mgcp fax t38 ecm
>> mgcp bind control source-interface Loopback104
>> mgcp bind media source-interface Loopback104
>> mgcp behavior g729-variants static-pt
>> !
>> mgcp profile default
>> !
>> dial-peer voice 9020 pots
>>  service mgcpapp
>>  port 0/2/0
>> !
>> dial-peer voice 9021 pots
>>  service mgcpapp
>>  port 0/2/1
>> !
>> ________________________________
>> vgw-jnhn-a#show ccm-manager config-download
>> Configuration Auto-Download Information
>> =======================================
>>  No configurations downloaded
>> Current state: Downloading XML file
>> Configuration Download statistics:
>>         Download Attempted             : 1
>>           Download Successful          : 0
>>           Download Failed              : 0
>>           TFTP Download Failed         : 3
>>         Configuration Attempted        : 0
>>           Configuration Successful     : 0
>>           Configuration Failed(Parsing): 0
>>           Configuration Failed(config) : 0
>> Last config download command:
>> Configuration Error History:
>> ________________________________
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it.
>>                               - LFJ (with apologies to Mr. Popeil)
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>