[cisco-voip] FXO ports and registering with CCM

Erick B. erickbee at gmail.com
Sun Mar 28 15:09:42 EDT 2010


So you get the FXO port working?

It saids registered, so at least one port is registered right?

On Sun, Mar 28, 2010 at 2:01 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> cool. thanks. it has what I have configured in ccm, just the hostname, no
> domain name.
>
> ________________________________
> vgw-jnhn-a#show ccm-manager
> MGCP Domain Name: vgw-jnhn-a
> Priority        Status                   Host
> ============================================================
> Primary         Registered               10.104.91.105
> First Backup    None
> Second Backup   None
> ________________________________
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ----- Original Message -----
> From: "Erick B." <erickbee at gmail.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "Scott Voll" <svoll.voip at gmail.com>, "cisco-voip voyp list"
> <cisco-voip at puck.nether.net>
> Sent: Sunday, March 28, 2010 12:45:35 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] FXO ports and registering with CCM
>
> The first line on 'show ccm' shows the MGCP domain name, that needs to
> match the name configured on CUCM.
>
>
> On Sun, Mar 28, 2010 at 9:54 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>> yes, multiple IPs - so I have bound MGCP to one of the loop back
>> addresses.
>>
>> it's this loop back address is the one that is allowed to TFTP to the
>> callmanager.
>>
>> i do not have a domain configured on the router, so i should be ok.
>>
>> although i didn't see any registration information on a "show mgcp"
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it.
>>                               - LFJ (with apologies to Mr. Popeil)
>>
>>
>> ----- Original Message -----
>> From: "Scott Voll" <svoll.voip at gmail.com>
>> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
>> Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net>
>> Sent: Sunday, March 28, 2010 12:03:44 AM GMT -05:00 US/Canada Eastern
>> Subject: Re: [cisco-voip] FXO ports and registering with CCM
>>
>> are there multiple IPs on the router? (if so, need to bind to IP)
>>  hostname
>> correct? (double check).
>>
>> Scott
>>
>> On Sat, Mar 27, 2010 at 5:27 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>>>
>>> I've finished configuring a couple of FXO port (with Ground Start) and
>>> CUCM has an IP address for the ports, but they're not registered yet. I
>>> have
>>> put the appropriate MGCP and ccm-manager commands based on another router
>>> and CCO documents.
>>>
>>> I have two questions:
>>>
>>> should these ports register unplugged or do I have to plug in the trunk
>>> line before they will register?
>>> I noticed some TFTP errors on the MGCP status, I'm thinking that's not
>>> good (see below config)
>>>
>>> ________________________________
>>> !
>>> voice-port 0/2/0
>>>  signal groundStart
>>> !
>>> voice-port 0/2/1
>>>  signal groundStart
>>> !
>>> ccm-manager fallback-mgcp
>>> ccm-manager mgcp
>>> ccm-manager config server 10.104.91.105
>>> ccm-manager config
>>> !
>>> mgcp
>>> mgcp call-agent 10.104.91.105 2427 service-type mgcp version 0.1
>>> mgcp fax t38 ecm
>>> mgcp bind control source-interface Loopback104
>>> mgcp bind media source-interface Loopback104
>>> mgcp behavior g729-variants static-pt
>>> !
>>> mgcp profile default
>>> !
>>> dial-peer voice 9020 pots
>>>  service mgcpapp
>>>  port 0/2/0
>>> !
>>> dial-peer voice 9021 pots
>>>  service mgcpapp
>>>  port 0/2/1
>>> !
>>> ________________________________
>>> vgw-jnhn-a#show ccm-manager config-download
>>> Configuration Auto-Download Information
>>> =======================================
>>>  No configurations downloaded
>>> Current state: Downloading XML file
>>> Configuration Download statistics:
>>>         Download Attempted             : 1
>>>           Download Successful          : 0
>>>           Download Failed              : 0
>>>           TFTP Download Failed         : 3
>>>         Configuration Attempted        : 0
>>>           Configuration Successful     : 0
>>>           Configuration Failed(Parsing): 0
>>>           Configuration Failed(config) : 0
>>> Last config download command:
>>> Configuration Error History:
>>> ________________________________
>>> ---
>>> Lelio Fulgenzi, B.A.
>>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>> Cooking with unix is easy. You just sed it and forget it.
>>>                               - LFJ (with apologies to Mr. Popeil)
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>



More information about the cisco-voip mailing list