[cisco-voip] CUCM Express - Different Time-Zones for remote phones

Anthony Kouloglou akoul at dataways.gr
Mon Mar 29 15:09:39 EDT 2010


Hi,
thanks for the reply. But i have not found a command inside the template 
that could assign a time-zone.


On 29/3/2010 9:20 ??, Nick Matthews wrote:
>
> Try a ephone-template on the ephone, that should work.
>
>> On Mar 29, 2010 9:39 AM, "Anthony Kouloglou" <akoul at dataways.gr 
>> <mailto:akoul at dataways.gr>> wrote:
>>
>> Hi all,
>> is it possible to configure 2 or more time-zones for sccp phones in 
>> order to have a remote device that gets different time?
>> I am running cucme 7.1 but i am ready to go to 8.0!!
>>
>> Regards
>> Anthony
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100329/208d3fed/attachment.html>


More information about the cisco-voip mailing list