[cisco-voip] CallManager Express 7.1 and G.722 (service phone g722CodecSupport 2)

Nate VanMaren VanMarenNP at ldschurch.org
Wed Mar 31 18:34:49 EDT 2010


Recessed handset cord connection.  The phone doesn't care about what handset it has, you can control the headset wideband enabled/disabled.  The non-wideband handset just doesn't sound as full when running g722.

-Nate



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Wednesday, March 31, 2010 3:42 PM
To: Brandon Bennett; Ed Leatherman
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] CallManager Express 7.1 and G.722 (service phone g722CodecSupport 2)

Looking at the receiver on the 7961 phone, how would one tell if it's a Wideband receiver....I notice my receiver's have no markings...only ?? twice shows G.722

-----Original Message-----
From: Brandon Bennett [mailto:bennetb at gmail.com] 
Sent: Wednesday, March 31, 2010 4:26 PM
To: Ed Leatherman
Cc: Jason Aarons (US); cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] CallManager Express 7.1 and G.722 (service phone g722CodecSupport 2)

Yeah but if the speaker isn't picking up the additional voice range
(4000hz to 7000hz) then it doesn't matter if G.722 is on or not.


On Wed, Mar 31, 2010 at 8:17 AM, Ed Leatherman <ealeatherman at gmail.com> wrote:
> This shouldn't keep the phone from using G.722 - the phone doesn't
> know what handset is plugged into it afaik. I've had plain jane 7961's
> out of box w/o the handset still connect at 722. (granted this is on
> CM and not CME)
>
> On Tue, Mar 30, 2010 at 9:19 PM, Brandon Bennett <bennetb at gmail.com> wrote:
>> Jason,
>>
>> I belive the 7941 itself supports the codec, but the handset and
>> speaker phone do not.  Cisco does state that you can swap the handset
>> for a wideband handset and gain the full G.722 support.
>>
>> Brandon
>>
>> On Tue, Mar 30, 2010 at 5:11 PM, Jason Aarons (US)
>> <jason.aarons at us.didata.com> wrote:
>>> Oddly all calls to the Receptionist 7961/7914 are G.711. I can't figure out
>>> why.  I make calls phone-to-phone or phone-to-pstn I get G.722.
>>>
>>>
>>>
>>> Everything else (except Unity Express) the calls are G.722. Using all 7961s
>>> with 8.4.2S.
>>>
>>>
>>>
>>> Does 7914 disable G.722?  Will see about Wireshark or trace tomorrow.  Any
>>> idea what I can debug on CME to see why G.711 is being selected for calls to
>>> her ? -jason
>>>
>>>
>>>
>>>
>>>
>>> SLTVWRTA01#show run | begin telephony-service
>>>
>>> telephony-service
>>>
>>>  no auto-reg-ephone
>>>
>>>  authentication credential didata123 didata123
>>>
>>>  xml user didata123 password didata123 15
>>>
>>>  codec g722-64
>>>
>>>  max-ephones 150
>>>
>>>  max-dn 200
>>>
>>>  ip source-address 10.14.129.1 port 2000
>>>
>>>  service phone g722CodecSupport 2
>>>
>>>  url services http://10.14.129.2/voiceview/common/login.do
>>>
>>>  url authentication http://10.14.129.1/CCMCIP/authenticate.asp
>>>
>>>  load 7914 S00105000300.SBN
>>>
>>>  load 7941 SCCP41.8-4-2S.LOADS
>>>
>>>  load 7941GE SCCP41.8-4-2S.LOADS
>>>
>>>  load 7945 SCCP45.8-4-2S.LOADS
>>>
>>>  load 7961 SCCP41.8-4-2S.loads
>>>
>>> voicemail 4199
>>>
>>>  max-conferences 40 gain -6
>>>
>>>  call-forward pattern .T
>>>
>>>  moh music-on-hold.au
>>>
>>>  multicast moh 239.1.1.1 port 2000
>>>
>>>  web admin system name cisco secret 5 $1$bpj1$WkwzUq8KXSqK1cdyUPCJD/
>>>
>>>  dn-webedit
>>>
>>>  time-webedit
>>>
>>>  transfer-system full-consult
>>>
>>>  secondary-dialtone 9
>>>
>>>  login timeout 60
>>>
>>>  create cnf-files version-stamp 7960 Mar 30 2010 18:51:10
>>>
>>> ________________________________
>>>
>>> Disclaimer: This e-mail communication and any attachments may contain
>>> confidential and privileged information and is for use by the designated
>>> addressee(s) named above only. If you are not the intended addressee, you
>>> are hereby notified that you have received this communication in error and
>>> that any use or reproduction of this email or its contents is strictly
>>> prohibited and may be unlawful. If you have received this communication in
>>> error, please notify us immediately by replying to this message and deleting
>>> it from your computer. Thank you.
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
>
> --
> Ed Leatherman
>

-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.





More information about the cisco-voip mailing list