[cisco-voip] DMA Error 4.2(3) to 7.1(3) is it a Bug???

[Ahmed Elnagar]

Dear all;

 

I am trying to upgrade a CCM from 4.2(3) to 7.1(3) and I have the error
attached (errors are regenerated on VMware, but the actually happen with
hardware server)...please note that I am migrating with different IP
address than the Publisher IP address that I took the DMA from.

 

Am I hitting the below bug again??? It does not match my version but it
the same symptoms.

 

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0
9186a00807f3307.shtml#topic5

 

 

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100502/5da980c2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DMA error.rar
Type: application/octet-stream
Size: 155632 bytes
Desc: DMA error.rar
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100502/5da980c2/attachment.obj>