[cisco-voip] UCM upgrade to 8.0(2)

[Ryan Ratliff]

The doc is pending update now, thanks for pointing it out.

Until the edits kick in 8.0(2) supports the same MCS servers as 8.0(1), with the added UC-on-UCS support.

-Ryan

On May 3, 2010, at 8:53 AM, Ryan Ratliff wrote:

> Looks like confusion surrounding 8.0(2) being the only release that supports vmware.
> 
> The page linked off of cisco.com/go/swonly should be the reference, and we are looking into why it is incorrect.
> 
> http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
> 
> -Ryan
> 
> On Apr 30, 2010, at 4:34 PM, Matthew Loraditch wrote:
> 
>> Was that in the release notes anywhere, I don’t see it? That makes no sense. There should be a warning on the download or something.
>> Also now 8.0.2b is apparently out, does this still apply to that release??
>>  
>>  
>> Matthew Loraditch, CCVP, CCNA, CCDA
>> 1965 Greenspring Drive
>> Timonium, MD 21093 
>> support at heliontechnologies.com
>> (p) (410) 252-8830
>> (F) (443) 541-1593
>> 
>> Visit us at www.heliontechnologies.com 
>> Support Issue? Email support at heliontechnologies.com for fast assistance!
>>  
>> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
>> Sent: Friday, April 30, 2010 4:21 PM
>> To: Cisco-Voip-Puck
>> Subject: [cisco-voip] UCM upgrade to 8.0(2)
>>  
>> Interesting information. According to this message and the associated URL, UCM 8.0(2) is ONLY supported on VMware ESXi 4.0. MCS servers are supported in "Bridged upgrade" which means you can upgrade to it then run DRS backup and restore to a 8.0(2) VMware installation.
>>  
>> The document "Tech tip: Move current CUCM to VMware", was updated Apr 30, 2010 by QD Wang.
>>  
>> To view the document, visit:
>> https://www.myciscocommunity.com/docs/DOC-16349#cf
>>  
>> Document:
>> --------------------------------------------------------------
>> At the moment, Cisco Unified Communications Manager 8.0(2) is supported on VMware ESXi 4.0 over Cisco UCS B200M1 and UCS-B200M1-VCS1 servers.  All other CUCM versions like 6.X, 7.X, 8.0(1) or servers are not supported on VMware.
>>  
>> For more detailed support information, please refer *Table 1.* Supported Hypervisors by Serverhttp://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
>>  
>> If the customers wants to move their current CUCM 6.X or 7.X to VMware, they can 1. Upgrade their CUCM to version 8.0(2) on the current MCS servers.Although CUCM 8.0(2) is not supported on MCS servers, it does support "bridged upgrade" to migrate to newer hardware.
>>  
>> 2. Make a backup of your software configuration via the Disaster Recovery System utility
>>  
>> 3. Install the Cisco Unified Communications Manager 8.0(2) on VMware virtual machine.
>>  
>> 4. Restore your software configuration from DRS backup.
>>  
>>  
>>  
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100503/78769b40/attachment.html>