[cisco-voip] Send Calling Name over MGCP PRI (NI2)

[Bill]

Well you can send it they just don't care about it. :-)

 

 

  _____  

From: Bill [mailto:bill at hitechconnection.net] 
Sent: Tuesday, May 04, 2010 8:11 AM
To: 'george.hendrix at l-3com.com'; 'cisco-voip at puck.nether.net'
Subject: RE: [cisco-voip] Send Calling Name over MGCP PRI (NI2)

 

You can't send Calling name to the Telco Only number. 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
george.hendrix at l-3com.com
Sent: Tuesday, May 04, 2010 8:02 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Send Calling Name over MGCP PRI (NI2)

 

Hello everyone,

 

  We have a CUCM 7.1 cluster connected to 3 PRI trunks using NI2 and they
are configured as MGCP trunks in CUCM.  We have a requirement for "calling
name" to be sent from the internal Cisco CUCM to the Telco.  From what I
have read, we simply need to do the following:

 

On the MGCP gateway:

Interface Serial0/0/0:23

isdn supp-service name calling

isdn outgoing ie facility

 

I have already checked the "Send Calling Name In Facility IE" checkbox on
the MGCP endpoint configurations.

 

Is there something else I am missing to make this work?  The Telco has said
that we simply need to configure our system to send the calling name info.
The PRI trunks to them are NI2.

 

Thanks,

 

Bill Hendrix

george.hendrix at l-3com.com 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100504/274ad91d/attachment.html>