[cisco-voip] GW MGCP with H.323 Configuration

[Dennis Heim]

Yes it is possibly just keep track of which protocol is controlling each port.

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com<mailto:dennis.heim at cdw.com>
www.berbee.com<http://www.berbee.com/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of george.hendrix at l-3com.com
Sent: Tuesday, May 04, 2010 2:37 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] GW MGCP with H.323 Configuration

Hi everyone,

  I was wondering if it is possible to add a router in CUCM as an h.323 gateway as well as configure it as an MGCP gateway in CUCM?  I imagine the best practice approach would be to simply go h.323 all the way since this is a remote router.  I am just curious if this is possible.

Thanks,

Bill Hendrix
george.hendrix at l-3com.com<mailto:george.hendrix at l-3com.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100504/ae528ec0/attachment.html>