[cisco-voip] VG224

[lelio at uoguelph.ca]

A power cycle will revert to the last saved config. So, as long as you  
did not do a write mem, you should be ok. You will, of course, also  
lose any other unsaved config changes.


…
Don't look at me, my iPod made that spilling mistake.

On 2010-05-10, at 6:25 AM, polo person <poloperson57 at hotmail.com> wrote:

> Hi,
>
> I'm starting to learn about Cisco equipment and am very green so  
> apologies for this post.
>
> Q. If I have mistakenly shutdown the only connected ethernet port on  
> a VG224 (doh!), - I connected to its IP address using telnet - will  
> a power cycle reset it or will I have to go to site and enable it  
> again using ther serial cable connected to my laptop?
>
> I do like to learn things the hard way!
>
>
> Get a free e-mail account with Hotmail. Sign-up now.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100510/628a8ff7/attachment.html>