[cisco-voip] Remote SRST router MOH

[Mathew Miller]

it is covered really well here:

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/srst/configuration/guide/srs_moh.html

On May 13, 2010, at 1:08 PM, george.hendrix at l-3com.com wrote:

> Hi everyone,
>  
>   I have a couple of remote sites connected to a central CCM 4.2 cluster.  The routers at each site are configured for SRST in the event of a WAN outage.  I have configured a MOH file on the router to play for when SRST kicks in.  What I’d like to do is be able to provide MOH at the site from the router flash when not in SRST mode.  I haven’t found anything to allow this when CCM is in control of the phones…so looks like I would need to configure the CCM MOH servers for multicast and then configure the MRG for the remote site with the “Use Multicast for MOH Audio” check box.  Along with this, I would need to enable multicast on the remote router.  Any help is appreciated.
>  
> Thanks,
>  
> Bill Hendrix
> george.hendrix at l-3com.com
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100513/cbb28639/attachment.html>