[cisco-voip] Cisco SME

[Matthew Saskin]

It's basically just CUCM without IP phones registered.  You use it as a
point of centralized call routing (multiple CUCM clusters trunk to it,
traditional PBX's via a gateway trunk to it, etc.).  IME can be deployed
centrally off of SME or off of a single CUCM 8 cluster.

Matthew Saskin
msaskin at gmail.com
203-253-9571

July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin


On Fri, May 14, 2010 at 10:44 AM, Bill <bill at hitechconnection.net> wrote:

>  So I am looking at the Session Manager Edition. Is it just CUCM but
> without IP phones registered to it? Is it just a centralized call manager
> for centralized call managers? Also if we deploy IME at some point do we
> need SME or can we just use the CUCM cluster we already have?
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100514/6e7be782/attachment.html>