[cisco-voip] Bulk Group Speed Dials

[Cheng, Karen]

Hey guys,

We are currently migrating from an Avaya system to a Cisco UCM 7.0 platform. On the Avaya system they had configured 400+ patterns/speed dials that were utilised by anyone that basically allows users to dial *7701 for mobile number 1 or *7702 for mobile number 2 etc up to 400+.

Can anyone think/know of an easy way to install/admin the same type of setup in Call manager?

I was thinking either CTI Ports or Translation Patterns but 400+ is an awful lot to put into a system and hard to find duplicates of the same destination if needed??

Thanks in advance......

Karen Cheng
Voice Network Engineer

<http://www.racq.com.au>





Plan ahead these school holidays with RACQ's online trip planner - and don't forget to pack Ultra Care for additional travel benefits following a breakdown. Some conditions apply. Visit http://www.racq.com.au for details.

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100519/76bdc79e/attachment.html>