[cisco-voip] VT Advantage and Polycom RMX

[Ryan Ratliff]

Double-right click in the CUVA windows to bring up it's diagnostic window.  If it is receiving video at all it may not be in a format that the app can decode.

-Ryan

On May 26, 2010, at 12:09 PM, Countryman, Edward wrote:

> Additional information from testing.  When dialing into the Polycom MCU (rmx2000) video is sent from VTAdvantage and participants can see the VTA participant, but does not receive.  The RMX says it is sending video.  I am getting closer but feel I am missing something somewhere.  Has anyone tried this before??
>  
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Countryman, Edward
> Sent: Tuesday, May 25, 2010 4:14 PM
> To: cisco-voip voyp list
> Subject: [cisco-voip] VT Advantage and Polycom RMX
>  
> Does anyone know or even have experience using the VT Advantage client to access a Polycom RMX bridge unit?
>  
> I was able to configure a voice connection (H.323) from my call manager to the Polycom RMX for voice access to conferences and noticed that my VT Advantage window would launch when connected (but no video)
>  
> Just wondering if it’s even possible
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100526/d3ba2fa1/attachment.html>