[cisco-voip] VG202/224 SRST Configuration

[Lelio Fulgenzi]

As far as I understand, SCCP configurations will register to the SRST router. But MGCP gateways will register as H323 gateways on the local device. Then you have to set up dial-peers. If you are going to have plenty of gateways you might need a gatekeeper. 

I'd be interested to know if I've got it wrong. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Gregory Wong" <wong_gregory at emc.com> 
To: cisco-voip at puck.nether.net 
Sent: Thursday, May 27, 2010 1:13:37 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] VG202/224 SRST Configuration 

VG202/224 SRST Configuration Does anyone have a SRST/failover configuration for the VG202/224? I’m currently running them in MGCP mode and there doesn’t seem to be much info out there. 

Thanks, 
Greg 
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100527/b64a6477/attachment.html>