[cisco-voip] E164 normalization on SIP Trunk for inbound calls

[Pavan K]

Folks,



For inbound calls, we can normally prefix/strip  digits on the H323  / MGCP
gateway page based on the calling number type (subscriber / national / ... )

When a call comes in through a SIP trunk, we lose the number type (due to
SIP limitations).

Does anybody have a good idea to normalize / re-classify the incoming call
(subscriber / national ....) in this scenario ?

I am using CCM 7.0


-- 
- Pavan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100530/b9ca3b4c/attachment.html>