[cisco-voip] Password Change

[Cheng, Karen]

Hey Mike,

If you have CLI access to your boxes use the CLI command:

Set password user admin

And

Set pass user security




-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike King
Sent: Wednesday, 3 November 2010 1:23 AM
To: Cisco VoIPoE List
Subject: [cisco-voip] Password Change

I've been handed the requirement that we change the Administrator
passwords on our CUCM, Unity Connection, and UCCX systems.
We're on version 7 of all platforms
We're concerned about a disgruntle employee, so I've been asked to
change all the passwords

We know all the passwords, so it's not a matter of resetting them.
(actually, the consultant used the same password for everything)

The only document I could find (other than the lost password reset
proceedures) is:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008073f593.shtml
which is Callmanager 4 (Windows) based.

Is there a document for Callmanager 7 out there?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


Call RACQ Auto Glass on 13 1905 today for all your windscreen replacement and chip repair needs.  Members receive 20% off.


Please Note: If you are not the intended recipient, please delete this email as its use is prohibited.  RACQ does not warrant or represent that this email is free from viruses or defects.  If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.