[cisco-voip] Unity Connection 8 and VMWare (Lab)

[aman.chugh at gmail.com]

 I did not have issues installing cucm 8.0.2 on vmware esxi 4. I used the hardware specs in ovf templates on cco. Also anther point of note is requirement of a ntp server  during the installation.

HTH
Aman
Sent from BlackBerry® on Airtel

-----Original Message-----
From: Mark Holloway <mh at markholloway.com>
Sender: cisco-voip-bounces at puck.nether.net
Date: Tue, 2 Nov 2010 22:39:29 
To: cisco-voip list<cisco-voip at puck.nether.net>
Subject: [cisco-voip] Unity Connection 8 and VMWare (Lab)

Has anyone been able to install Unity Connection 8 on VMWare Workstation 7 in their lab?  I configured 1 processor, Red Hat Linux 4, LSI Logic SCSI 160GB, 2048 GB of memory, but no luck.  When the disc boots only CUCM or CUCMBE appear in the menu. Below the menu it says "Products not supported - Unity Connection". I've heard of folks getting UC8 installed just fine on VMWare Workstation 8. 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip