[cisco-voip] Unity Connection 8 and VMWare (Lab)

[Mark Holloway]

Thanks everyone.  The issue was my hard drive needed to be larger than 160GB and I increased the memory.  I had to do both.


On Nov 3, 2010, at 4:10 AM, Jobe Gates wrote:

> I have it working on 8.03a with VM workstation 6.5.  Your RAM is to low has to be over 4 GB. 
> 
> Thanks,
> Jobe
> 
> On Nov 3, 2010, at 1:39 AM, Mark Holloway <mh at markholloway.com> wrote:
> 
>> Has anyone been able to install Unity Connection 8 on VMWare Workstation 7 in their lab?  I configured 1 processor, Red Hat Linux 4, LSI Logic SCSI 160GB, 2048 GB of memory, but no luck.  When the disc boots only CUCM or CUCMBE appear in the menu. Below the menu it says "Products not supported - Unity Connection". I've heard of folks getting UC8 installed just fine on VMWare Workstation 8. 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip