[cisco-voip] VG224 SCCP analog conferencing

Kevin Damisch kevin.damisch at vitalsite.com
Thu Nov 4 14:52:51 EDT 2010


If we have analog phones connected to a SCCP VG224 port, we should be able to make conference calls with the max participants as specified in the service parameters, correct?  So, we can simply dial an extension for a 2-party call, then hookflash, dial another extension, hookflash again.  At that point, we have a 3-way conference.  Then, can we continue to use hookflash again, and add more participants similar to the Confrn softkey on an IP phone?  Just curious if there was a limitation in doing this from an analog port.  Since it is a SCCP port, I would think that it would be handled like a normal IP phone, right?  I don't have one handy to test this out.

Thanks,
Kevin

________________________________

This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101104/98a2cd9b/attachment.html>


More information about the cisco-voip mailing list