[cisco-voip] Add a SIP trunk to Route Group

[Christopher Trown]

     Greetings all.

     This should not be difficult.  I have set up a SIP trunk to an
Avaya SES server.  I added some specific route patterns during testing
to some test sets.  I could make calls in either direction.  I have
removed the route patterns I used for the initial set up and testing.
Out of desperation, I've even removed the SIP trunk and recreated it.

     The current route group has just a QSIG trunk in it.  MGCP was used
for this.

     I'm using CUCM 7.1.3.3.  When I try to add the SIP trunk, it is not
listed in the available devices.

     I must be missing something.  What should I check?

Chris...

-- 
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ctrown.vcf
Type: text/x-vcard
Size: 236 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101109/e0f8a1b5/attachment.vcf>