[cisco-voip] 2821 PVDM Compatibility

[Michael Wilusz (miwilusz)]

It should work without an issue.

 

-mike

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Dust
Sent: Friday, November 19, 2010 9:50 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 2821 PVDM Compatibility

 

I have a 2821 router I am going to be using as a voice gateway shortly.

 

I have a spare PVDM2-16 module that was being used in a 2811 router, so can I reuse this module in the 2821?

 

I am taking it that I can as they are the same series of router.

 

James 

 


Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this. 

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/ <http://www.charles-stanley.co.uk/contact-us/disclosure/> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101119/ccf6f239/attachment.html>