[cisco-voip] Dry Closure Phones

[Eric Butcher]

Great!  I didn’t know they came out with a new one!  The original had 66 style punchdowns for the wires.  This one looks to use more convenient methods.  Looks like you still have to make your own power wire though ☺


Eric Butcher
Cisco Unified Communications Engineer
CDW Professional Services
11711 N Meridian, Ste 225
Carmel, IN  46032
• 317.569.4282 - IP Phone
• 765.744.1458 - Mobile
• eric.butcher at cdw.com<mailto:eric.butcher at cdw.com>
http://www.cdw.com/


From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
Sent: Tuesday, November 23, 2010 1:58 PM
To: Eric Butcher
Cc: David Zhars; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Dry Closure Phones

...and it looks like the TAM-B has been updated to the TAMB2!

http://www.bogen.com/products/telephonepaging/



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

________________________________
From: "Eric Butcher" <Eric.Butcher at cdw.com>
To: "David Zhars" <dzhars at gmail.com>, cisco-voip at puck.nether.net
Sent: Tuesday, November 23, 2010 1:42:18 PM
Subject: Re: [cisco-voip] Dry Closure Phones


With contact closure, you use a pair of wires to create a loop to signal a channel open, and a separate pair of wires to carry the audio (traditional tip and ring pair).  You cannot do this without an adaptor.  The best way I have found is to use a bogen tam-b or a pagepal, connected to an FXO port.


Eric Butcher
Cisco Unified Communications Engineer
CDW Professional Services
11711 N Meridian, Ste 225
Carmel, IN  46032
• 317.569.4282 - IP Phone
• 765.744.1458 - Mobile
• eric.butcher at cdw.com<mailto:eric.butcher at cdw.com>
http://www.cdw.com/


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Zhars
Sent: Tuesday, November 23, 2010 1:11 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Dry Closure Phones

An app we are installing at our Police Dept requires the phones to have a "dry closure" contact or something like that.
If I google this, I see a Dry Closure thing for 2600/3600 series, so I am researching that.
Do any phones supported by CCM 8 support dry closure?  Ultimately, I want the phones to work with SRST, so I probably don't want to stray too far from the Cisco wagon...

Appreciate any insight.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101123/e09961b6/attachment.html>