[cisco-voip] UC520 and Siemens PBS Trunk Integration

[Lekan Akinremi (NG)]

Hi,

I have a UC520 installed and its working internally and i need to provision it for outbound calls. I have an E1 terminated on a Siemens PBX and trunked to the UC520. Could anybody assist with the Siemens / UC520 commands for integration as i have tried a whole lot and its not working.


Best Regards,

Olalekan S. Akinremi
Systems Engineer
Network Integration and Converged Communication Solutions
Dimension Data Nigeria
Tel: +234 (1)4617390
Cell: +234 8085653090 07028448285
Fax: +234 (1)4617654
Email: lekan.akinremi at ng.didata.com<mailto:lekan.akinremi at ng.didata.com>
Website: www.dimensiondata.com<http://www.dimensiondata.com/>

Before printing this email please think about the environment . GREEN IS ALWAYS GOOD.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101125/fd7f87b3/attachment.html>