[cisco-voip] Anyone setup 7828-I4 CUCMBE 8 before?

[Hughes, Scott GRE-MG]

This doesn't answer your question exactly, but we have CUPC deskphone control working with EM profiles with CUPS/CUPC 8.0 and CUCM 7

CUPC 8 is lightyears better than 7..

Scott

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lee
Sent: Thursday, November 25, 2010 8:58 AM
To: Ki Wi
Cc: Cisco VoIP List
Subject: Re: [cisco-voip] Anyone setup 7828-I4 CUCMBE 8 before?

It's not free to upgrade to a major version.

Did you order UCSS along with ESW? That would allow you to go to 8
On Tue, Nov 23, 2010 at 10:34 PM, Ki Wi <kiwi.voice at gmail.com<mailto:kiwi.voice at gmail.com>> wrote:
Which version should I be using to install it?
I tried to get the latest 8.0.3a SU1 but it can't detect the hardware and mark it as legacy (i make the disk bootable myself) .

My side somehow managed to ordered the cucmbe7 version but I wish to upgrade it to 8. I have yet to register the license, I should be able to contact licensing and get the license for cucmbe 8 right?

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



NOTICE TO RECIPIENT: The information contained in this message from
Great River Energy and any attachments are confidential and intended
only for the named recipient(s). If you have received this message in 
error, you are prohibited from copying, distributing or using the
information. Please contact the sender immediately by return email and
delete the original message.


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101126/b99d87b5/attachment.html>