[cisco-voip] 7940-7960 support with UCM 8.0

[Chris Osborne (US)]

Yes,  entire school I upgraded to 8 just had old phones.




Chris Osborne
Email: chris.osborne at us.didata.com<mailto:chris.osborne at us.didata.com>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Lydick
Sent: Friday, October 01, 2010 11:01 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7940-7960 support with UCM 8.0

Will the  (non G) 7940-7960 work with UCM 8.0? I see the default loads as 8.0.1 so I guess we can assume they will work?

Best Regards,

Mike Lydick



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101003/4104d348/attachment.html>