[cisco-voip] VG224 IOS Update

[Lelio Fulgenzi]

a VG224 is the same as any other IOS device as far as I know. 

these are the steps i would take: 

    • upload IOS image to flash 
    • copy startup to startup.old 
    • change boot image command to point to the new image 
    • wr mem 
    • cross fingers 
    • boot device 
    • wr mem so that any config changes due to version change are saved 
    • compare both startups so you know what changed 
    • test functionality (especially faxing if used) 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Michael Dugan" <mdugan at pacific.edu> 
To: cisco-voip at puck.nether.net 
Sent: Wednesday, October 6, 2010 3:49:06 PM 
Subject: [cisco-voip] VG224 IOS Update 




Does anyone have a detailed process for updating the IOS on a VG224? 



Thanks 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101006/8a1810f2/attachment.html>