[cisco-voip] SCCP ports on 3845

[Matthew Loraditch]

A newer version I think vic3s are way newer than 4.1

Sent from my Android phone using TouchDown (www.nitrodesk.com)

-----Original Message-----
From: Lelio Fulgenzi [lelio at uoguelph.ca]
Received: 10/7/10 5:06 PM
To: voyp list [cisco-voip at puck.nether.net]
Subject: Re: [cisco-voip] SCCP ports on 3845

ok, I just tried configuring it as an MGCP and it doesn't even list the VIC3-2FXS-E/DID in the drop down....what am I missing here?

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)


________________________________
From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
To: "voyp list" <cisco-voip at puck.nether.net>
Sent: Thursday, October 7, 2010 5:02:58 PM
Subject: [cisco-voip] SCCP ports on 3845

I've installed two VIC3-2FXS-E/DID cards in a 3845 and I'd like to configure them as SCCP. Not sure how I can do that on CallManager 4.1(3).

In v7, when I install a new gateway, I have a choice between MGCP and SCCP, but on 4.1(3) I only have MGCP as an option.

Any suggestions?

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101007/1f7a8404/attachment.html>