[cisco-voip] VG224 IOS Update

[Eric Isakson]

I think you need to do boot system slot0:/<PATH TO THE .BIN FILE>


Eric Isakson | Network Engineer | Information Technology | Ogden Clinic | eric.isakson at ogdenclinic.com | 801.475.3572

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Charles Goldsmith
Sent: Thursday, October 07, 2010 3:49 PM
To: Lelio Fulgenzi
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VG224 IOS Update

I recently upgraded my vg224's, and this works, aside from the change boot image command, the command is there, but I could not find a combination to get this to work.  I didn't take the time to google it, I knew I had extra flash cards to back out the upgrade if needed, so just deleted the old image and rebooted.

I have deployed all of my vg224's, so nothing to test with handily, but I'd be curious if anyone found a boot system command that would work with this.

Thanks
Charles
On Wed, Oct 6, 2010 at 2:57 PM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:
a VG224 is the same as any other IOS device as far as I know.

these are the steps i would take:

 *   upload IOS image to flash
 *   copy startup to startup.old
 *   change boot image command to point to the new image
 *   wr mem
 *   cross fingers
 *   boot device
 *   wr mem so that any config changes due to version change are saved
 *   compare both startups so you know what changed
 *   test functionality (especially faxing if used)


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

________________________________
From: "Michael Dugan" <mdugan at pacific.edu<mailto:mdugan at pacific.edu>>

To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Wednesday, October 6, 2010 3:49:06 PM

Subject: [cisco-voip] VG224 IOS Update
Does anyone have a detailed process for updating the IOS on a VG224?

Thanks

_______________________________________________
cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


####################################################################################################
This email is confidential and may be legally privileged. It is intended solely for the addressee.
Access to this email by anyone else, unless expressly approved by the sender or an authorized
addressee, is unauthorized. If you are not the intended recipient, any disclosure, copying,
distribution or any action omitted or taken in reliance on it, is prohibited and may be unlawful.
If you believe that you have received this email in error, please contact the sender, delete this
email, and destroy all copies.
####################################################################################################
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101007/cd9b31b4/attachment.html>