[cisco-voip] curious...what can cause a port to be removed from a dial-peer

[Lelio Fulgenzi]

I'm just reviewing an existing router's config and noticed that half my dial-peers are missing an outbound port, namely the second PRI. Now, I could understand myself leaving a configuration like this if it was the first PRI missing from the dial-peers so that way I always had the configuration, but I'd only use the second PRI and leave the first for inbound calls. But to leave the dial-peers only with the first PRI just doesn't make sense. 

I know that during SRST configurations are changed, and if a write mem is performed you keep those changes. 

Can anything happen that would take a port out of dial peer configuration like this? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101008/439cb415/attachment.html>