[cisco-voip] Phone to phone call doesn't work?

Go0se me at go0se.com
Tue Oct 12 12:32:11 EDT 2010


I've seen similar behavior from two different scenarios.

 

1)      Phone had an incorrect subnet mask

2)      Phone had no default gateway

 

Thanks,

 

Go0se

 

My blog:

http://atc.go0se.com

 

--------------------------------------------

Help Hopegivers International

Feed the orphans of Haiti and India

http://www.hopegivers.org

--------------------------------------------

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Tuesday, October 12, 2010 11:02 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Phone to phone call doesn't work?

 

OK--

 

I'm going out on a limb here.

 

we have now had two phones that can not dial one phone.

 

eg.

 

Phone A calls phone N and they can not hear the other person.  phone A can
call B-Z just not N.  N can call everyone except A.

 

Have a second phone, call It B,  if it calls X they can't hear, but they can
call all others.  Same for Phone X.

 

CM 7.1.5bsu2 and firmware 9.0.3 on 7961's.

 

Going over now to do a Wireshark on both ends to see if we can open a TAC
case, but wanted to know if anyone else has ever seen this?

 

TIA

 

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101012/081c3528/attachment.html>


More information about the cisco-voip mailing list