[cisco-voip] term42.default.loads & term62.default.loads

[Lelio Fulgenzi]

Thanks Ryan. 

I'm guessing then, if I don't update those files, and perform a factory reset, the phone will first load the previous version, try to register to call manager, see the new firmware information and then upgrade? 

So basically downgrade, then upgrade? 

I'm not saying I want to keep it this way, just trying to understand what will happen. I guess I could actually confirm the results by doing this myself too. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Ryan Ratliff" <rratliff at cisco.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "voyp list" <cisco-voip at puck.nether.net> 
Sent: Tuesday, October 12, 2010 3:17:58 PM 
Subject: Re: [cisco-voip] term42.default.loads & term62.default.loads 

They are used to recover from a factory reset. 
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7962g_7942g/7_0/english/administration/guide/7962trb.html#wp1031705 



-Ryan 


On Oct 12, 2010, at 3:03 PM, Lelio Fulgenzi wrote: 


ok...when are they used then? if i keep the originals from a previous version, copy over firmware files from a new version and update either the device defaults page or manually configure a phone is that ok? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Ryan Ratliff" < rratliff at cisco.com > 
To: "Lelio Fulgenzi" < lelio at uoguelph.ca > 
Cc: "voyp list" < cisco-voip at puck.nether.net > 
Sent: Tuesday, October 12, 2010 2:16:31 PM 
Subject: Re: [cisco-voip] term42.default.loads & term62.default.loads 

They are never created, only copied either manually via zip file (windows CCM) or by the load installer. 



-Ryan 


On Oct 12, 2010, at 2:05 PM, Lelio Fulgenzi wrote: 



can anyone shed some light on when i need to overwrite the term42.default.loads & term62.default.loads files when copying over firmware files? 

if i just copy over the firmware files and modify the device defaults on CCM, will it create these two files new? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101012/c7fd02b2/attachment.html>