[cisco-voip] 7942 and 7962 have different power adapters?

[Norton, Mike]

The 7941 sets I have within arm’s reach also have the raised plastic around the connector. 7940 doesn’t. Old power supply doesn’t fit 7941, but new power supply fits 7940 and 7941.

The old kind had the same connector as the power supplies for wireless APs (same voltage and current), so I always just kinda assumed that they changed the connector on the phones so that people would be forced to buy two kinds of spares instead of just one.

--
Mike Norton
I.T. Support
Peace Wapiti School Division No. 76
Helpdesk: 780-831-3080
Direct: 780-831-3076



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: October-12-10 3:09 PM
To: voyp list
Subject: [cisco-voip] 7942 and 7962 have different power adapters?

OK, just looking at the back of the 7962 and I noticed the DC power socket has some raised plastic around it so you can not use the old power adapters which supply the exact same power requirements.

What's up?

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101012/dc93af18/attachment.html>