[cisco-voip] 7945G and SRST

[Lelio Fulgenzi]

When I ran into this, upgrading the firmware was needed.

Check out the SRST compatibility matrix (or is in minimum loads  
chart?) to see what you need.

…
Don't look at me, my iPod maid that spilling mistake.

On 2010-10-14, at 6:39 PM, <Johnny.Crothers at datacraft.co.nz> wrote:

> Hi Everyone,
>
>
>
> I'm just building up an SRST site with 7937 conf phones and 7945G's.  
> When I failover to SRST the phones loose their DN's but register ok.  
> 7937 phones are fine.
>
>
>
> max-dn is configured and max-ephone. when i do a show ephone  
> registration i'm seeing "Max_dn 0" which is fairly self explanatory.
>
>
>
> Has anyone seen this? IOS version is 12.4 24T, CUCM 7.1.5.
>
>
>
> Cheers,
>
>
>
> Johnny
>
>
> *** 
> *** 
> *** 
> ********************************************************************
> This email and all contents are subject to the following disclaimer:
>
> http://www.datacraft-asia.com/disclaimer
> *** 
> *** 
> *** 
> ********************************************************************
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101014/d7dc9312/attachment.html>