[cisco-voip] ccm upgrade 4 to 6

[Robert Knapp]

yes, but ccm said it was corrupt, ended up opening a case with TAC because in addition to that issue, the PAK's had 0 quantity.  TAC solved it by issuing an awesome license.  thanks for the reply.

Thanks,

Robert Knapp

________________________________________
From: Buchanan, James [jbuchanan at presidio.com]
Sent: Sunday, October 17, 2010 17:15
To: Robert Knapp; cisco-voip at puck.nether.net
Subject: RE: ccm upgrade 4 to 6

Did you apply the export license created by the DMA tool?

James Buchanan | Senior Network Engineer | South Region | Presidio Networked Solutions
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com
D: 615-866-5729 | F: 615-866-5781 | www.presidio.com <http://www.presidio.com>
CCIE #25863, Voice


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert Knapp
Sent: Sunday, October 17, 2010 12:44 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ccm upgrade 4 to 6

I know upgrading to 6, just go with it.

I have proper license files from Cisco.  When uploaded and restarted the pub does not show a server license.  Any suggestions?

Thanks,

Robert Knapp
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip