[cisco-voip] Directory Dail Rules

[Ahmed Elnagar]

Yes just configure the dial-rules the way you wish it to manipulate the
call, then you need to run a cop file to have changes take affect.

 

My personal opinion: try to avoid using application dial-rules as much
as you can I hate it "be aware that it will affect SNR operation as the
RD will be affected by the new dial-rules"

You can find a reference for it in CUCIMOC install guide below:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/7_1/english/integr
at/guide/config_servers.html#wp1054388 

 

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

  

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Tuesday, October 19, 2010 12:21 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Directory Dail Rules

 

OK--

 

So we had CM 7.1 setup to use it's own directory.  Now we are LDAP
sync'd and the phone numbers are e.164.  How do I setup the directory
dial rules  to strip the first 6 digits?

 

I believe I need to go to the call routing --> dial rules -- > setup the
rule to match and strip.  What do I do next?  upload the dialrule cop
file?  

 

I can't find the doc's on it.

 

TIA

 

Scott

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101019/4bb29a52/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1801 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101019/4bb29a52/attachment.jpg>