[cisco-voip] Device Mobility Mode Activation

[STEVEN CASPER]

 I am planning on using the Device Mobility feature and looking at the Device Mobility Mode parameter to enable this through service parameters it says that the CCM service on each subscriber needs to be restarted after turning this on. Doing this cluster wide is not any easy thing to get approved. Would turning Device Mobility Mode on and then resetting Device Pools as the feature is implemented at each site accomplish the same thing? My other option would be to use BAT to turn enable this on a per phone basis.
 
Thanks,
Steve
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101020/b8eab0a4/attachment.html>