[cisco-voip] SNMP counter to get SIP Trunk registering status

[Peter Slow]

You could do this with EEM and a little bit of TCL if you wanted to.
then you could poll via SNMP or send a trap... or an email... ...that
could trigger something else that would pour you a cup of coffee.

-Peter

On Mon, Oct 25, 2010 at 4:37 AM, Alain RICHARD
<alain.richard at equation.fr> wrote:
> We would like to supervise the registering status of a SIP Trunk using SNMP.
> Currently we can look at this status using CLI :
>
>
> ipbx1#sh sip-ua register status
> Line          peer           expires(sec)  registered   P-Associated-URI
> ============  =============  ============  ===========  ================
> equation-0xV  -1               1936          yes
> And I am looking for doing the same thing using SNMP.
> Currently I have looked to the CISCO-SIP-UA-MIB, but it seams not to be any
> related informations. Who have already done something like that ? Using what
> MIB or counter ?
> Regards,
>
>
> --
>
> Alain RICHARD <mailto:alain.richard at equation.fr>
>
> EQUATION SA <http://www.equation.fr/>
>
> Tel : +33 477 79 48 00     Fax : +33 477 79 48 01
>
> E-Liance, Opérateur des entreprises et collectivités,
>
> Liaisons Fibre optique, SDSL et ADSL <http://www.e-liance.fr>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>