[cisco-voip] IBM Remote Management Interface.

[Andy Carse]

  Thanks Ryan for the pointers.

This works for the System X servers (7835 & 7845)

The 7825 are called something different in the Bios, configuration is 
similar but I couldn't get the interface to come up after comfiguring in 
BIOS.

I'll have another go in the morning.

On 10/27/2010 06:49 PM, Ryan Ratliff wrote:
> Does this help?
> http://publib.boulder.ibm.com/infocenter/iseries/v7r1m0/index.jsp?topic=/rzahq/updateimm.htm
>
> Initial setup is via the BIOS, hit F1 for Setup, then System Settings->IMM
>
> -Ryan
>
> On Oct 27, 2010, at 12:55 PM, Andy Carse wrote:
>
> Hi,
> I have a question about how these cards are setup?
>
> I can't find any information on this, at least the HP ILO you could get to via the server was booting up.
>
> The IBM's don't seem to have that option.
>
> Any pointers much appreciated.
>

-- 
Rgds Andy