[cisco-voip] help with debuging calls during SRST

[Lelio Fulgenzi]

I need to block for specific users using COR lists. I don't think you can do that with after-hours. 

I'd also like to stick with dial-peers for a few other reasons. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Mathew Miller" <miller.mathew at gmail.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "Leslie Meade" <lmeade at signal.ca>, "voyp list" <cisco-voip at puck.nether.net> 
Sent: Thursday, October 28, 2010 1:54:37 PM 
Subject: Re: [cisco-voip] help with debuging calls during SRST 


Why not use afterhours block pattern. 

call-manager-fallback 
after-hours block pattern 1 91900 7-24 
after-hours day Sun 00:00 23:59 





On Oct 28, 2010, at 12:10 PM, Lelio Fulgenzi wrote: 




actually, i don't want it to work, that's why i'm sending the BAD# prefix and no digits. 

not the best way to prevent calls from going through, but the only one i know of right now. 

i just need to figure out which debugs to turn on to see what i'm sending. :( 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Leslie Meade" < lmeade at signal.ca > 
To: "Lelio Fulgenzi" < lelio at uoguelph.ca >, "voyp list" < cisco-voip at puck.nether.net > 
Sent: Thursday, October 28, 2010 12:47:12 PM 
Subject: RE: [cisco-voip] help with debuging calls during SRST 



Add this line 


Forward-digits 3 


It will drop the 9 and send the rest.. 








From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Thursday, October 28, 2010 8:14 AM 
To: voyp list 
Subject: [cisco-voip] help with debuging calls during SRST 



I'm not having any luck debugging calls during SRST mode. What I'm looking to find out is: 

    • which dial-peer is being hit 
    • all the digits that are being sent out to the PRI (including translations and prefixes) 
    • which PRI is being used 



I'm able to get which dial-peer is being hit and the translations, but I can't see the digits being sent to the PRI and which PRI is being used. I've got a crossover connected so both ports are up, but I don't think it's that, I think I'm just not using the right debug statements. 

For example, when I hit the dial-peer below. I'd like to see the "BAD#" digits being sent to pri 0/0/0. 



dial-peer voice 91811901 pots 
corlist outgoing uogdev-block-services-css 
huntstop 
preference 2 
destination-pattern 9[1-8]11 
clid network-number 5196741500 
port 0/0/0:23 
forward-digits 0 
prefix BAD# 





--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101028/4034eeb1/attachment.html>