[cisco-voip] OT: Normalization rules for MS OCS?

[Ahmed Elnagar]

You can use application dial rules on CUCM instead if you want.

 

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

  

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Thursday, October 28, 2010 1:18 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] OT: Normalization rules for MS OCS?

 

Anyone had to do normalization rules for OCS (CUCIMOC).

 

I want our current (XXX) XXX-XXXX to change to +1XXXXXXXXXX.  Anyone
done that successfully?  How?

 

Thanks

 

Scott

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101029/971d925f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1801 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101029/971d925f/attachment.jpg>