[cisco-voip] DECT phones

[Philip Walenta]

If this is the US or EMEA Polycom (the company for which I work so yes you
could consider this a plug) has DECT handsets with a basestation that
integrates directly into CUCM.  You can get SIP phones or a base that does
SCCP as well.  Check out the Kirk wireless server 600v3 for SCCP, or the 300
or 6000 for SIP.

I use the SCCP model for my home connected to a CUCME without issue.

All handsets are valid.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ratko Dodevski
Sent: Saturday, September 04, 2010 8:39 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] DECT phones

Hi guys,
I have this customer (a shopping mall) that requires several mobile
phones. Because there is no wireless coverage in place and there is no
interest in doing this (especial not in the parking floors), I'm
looking into some DECT phones with additional  antennas acting as a
repeaters. Does anyone has any experience in this and some
recommendations? The phones need to register on Call Manager 7, so I
was thinking of using Cisco SPA (or ATA) to convert the analog to IP
signal. Any thoughts?

-- 
Ratko
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip