[cisco-voip] Cisco VG30D Config

[Lelio Fulgenzi]

I've never worked with one of theses devices, but if it's not IOS  
based, you can try ftp'ing to it and logging in with "admin" and the  
enable password. That's what you can do with the VG248.

As for the CCM portion, you'd expect that you could just swap out the  
MAC address, but you may be better of recreating it.

…
Don't look at me, my iPod maid that spilling mistake.

On 2010-09-09, at 9:38 AM, "James Dust" <james.dust at charles-stanley.co.uk 
 > wrote:

> I have a Cisco VG30D which is on loan from a vendor, which is due to  
> be swapped with a new unit we have purchased.
>
>
>
> I need to export the configuration from the loan unit somehow, and  
> upload it to the new unit.
>
>
>
> Has anyone done this before?
>
>
>
> Many thanks
>
>
>
> James
>
>
> Consider the environment - Think before you print
>
> The contents of this email are confidential to the intended  
> recipient and may not be disclosed. Although it is believed that  
> this email and any attachments are virus free, it is the  
> responsibility of the recipient to confirm this.
>
> You are advised that urgent, time-sensitive communications should  
> not be sent by email. We hereby give you notice that a delivery  
> receipt does not constitute acknowledgement or receipt by the  
> intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators  
> (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100909/dc6ffa51/attachment.html>