[cisco-voip] Overhead paging through Dukane amplifiers

Jason Aarons (US) jason.aarons at us.didata.com
Fri Sep 10 20:42:06 EDT 2010


>From my personal experience having paging ports stuck offhook you should avoid FXS/9970 due to the lack of supervisory disconnect,  always stick with FXO and another model Valcom or another solution.

Search Puck for my notes on 9970.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin Damisch
Sent: Friday, September 10, 2010 12:09 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Overhead paging through Dukane amplifiers

Customer has an Avaya PBX with 9 AUX ports wired to a few racks full of Dukane amplifiers for the overhead speakers.  They also have a Valcom V2000A single zone unit for an all call zone, which is connected to a CO trunk port on the Avaya PBX.  So, they have a total of 10 zones, the all call and the 9 individual zones.

We are migrating them over to CUCM 8.x and am looking for a method of allowing them to have at least 30 separate zones that can be accessed simultaneously, which is going to require 30 separate talk paths between Cisco and the Dukane units.  All call zone would still override everything though.  I know this could easily be done with a bunch of Valcom units and FXO ports, but I was curious if this could be done in any way with VG224 ports with each port being dedicated per zone and going directly to the Dukane amps without a page adapter such as a Valcom v9970.

Example of VG224 ports:
Port 1 - x1001 - zone 1
Port 2 - x1002 - zone 2
Port 3 - x1003 - zone 3
Port 4 - x1004 - zone 4
and so on and so on for the rest of the VG224 ports.  When I dial 1003 for example, it should page zone 3.

Thoughts?  Suggestions?

Thanks,
Kevin

________________________________

This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document.


-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100910/249f6bda/attachment.html>


More information about the cisco-voip mailing list