[cisco-voip] Upgrade from CUCM 7.1.2 to CUCM 7.1.(5b)

[Wes Sisk]

No, if you re-upgrade the pub it will not have repl agreements with 
subs. you will need to re-upgrade subs as well.

/Wes

Cheng, Karen wrote:
>
> Just for confirmation purposes can I just re-run the upgrade on the 
> Publisher?
>
>  
>
> My thoughts are that considering the publisher is the one that holds 
> the main information I should be able to just re-run it on that one 
> and switch versions over and the publisher will push out the updated 
> information after that?
>
>  
>
> Or is that going to effectively take longer in the long run? Or cause 
> database corruptions?
>
>  
>
> */Karen Cheng/*
>
> /Voice Network Engineer/
>
>  
>
>  
>
> *From:* Wes Sisk [mailto:wsisk at cisco.com]
> *Sent:* Sunday, 12 September 2010 7:26 AM
> *To:* Matthew Loraditch
> *Cc:* Cheng, Karen; jason.aarons at us.didata.com; cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Upgrade from CUCM 7.1.2 to CUCM 7.1.(5b)
>
>  
>
> Agreed. Just rerun the upgrade.  In some instances (bugs) you have to 
> reboot the active before you can re-run the upgrade.
>
> /Wes
>
> Matthew Loraditch wrote:
>
> I have done that and you can just rerun it
>
> Sent from my Android phone using TouchDown (www.nitrodesk.com 
> <http://www.nitrodesk.com>)
>
> -----Original Message-----
> *From:* Jason Aarons (US) [jason.aarons at us.didata.com 
> <mailto:jason.aarons at us.didata.com>]
> *Received:* 9/11/10 4:18 PM
> *To:* Wes Sisk [wsisk at cisco.com <mailto:wsisk at cisco.com>]; Cheng, 
> Karen [Karen.Cheng at racq.com.au <mailto:Karen.Cheng at racq.com.au>]
> *CC:* cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net> 
> [cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>]
> *Subject:* Re: [cisco-voip] Upgrade from CUCM 7.1.2 to CUCM 7.1.(5b)
>
> Say you upgrade from 7.1 to 7.5 but forget to switch partitions/reboot 
> and remember 5 months later.  Is there a cancel command or can you 
> re-do the upgrade?
>
>  
>
> *From:* cisco-voip-bounces at puck.nether.net 
> <mailto:cisco-voip-bounces at puck.nether.net> 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Wes Sisk
> *Sent:* Saturday, September 11, 2010 4:08 PM
> *To:* Cheng, Karen
> *Cc:* cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> *Subject:* Re: [cisco-voip] Upgrade from CUCM 7.1.2 to CUCM 7.1.(5b)
>
>  
>
> That is correct. Database is migrated at upgrade time. Changes made 
> after upgrade are lost.  You need a change freeze after upgrade and 
> before switch version.
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/7_0_1/cucos/iptpch7.html#wp1040186
>
> ------------------------------------------------------------------------
>
> *Note *You can only make changes to the database on the active 
> partition. The database on the inactive partition does not get 
> updated. If you make changes to the database after an upgrade, you 
> must repeat those changes after switching the partition.
>
>
> /Wes
>
>
>
> Cheng, Karen wrote:
>
> Hmm I think I answered my own question.
>
>  
>
> Although system configuration gets ported over, database changes since 
> the upgrade wont.
>
>  
>
> Regards
>
>  
>
> */Karen Cheng/*
>
> /Voice Network Engineer/
>
>  
>
>  
>
>  
>
> *From:* cisco-voip-bounces at puck.nether.net 
> <mailto:cisco-voip-bounces at puck.nether.net> 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Karen Cheng
> *Sent:* Saturday, 11 September 2010 4:33 PM
> *To:* cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> *Subject:* [cisco-voip] Upgrade from CUCM 7.1.2 to CUCM 7.1.(5b)
>
>  
>
> Hey guys,
>
>  
>
> Just wondering whether anyone has run into an issue where upgrading to 
> CUCM 7.1.(5b) results in missing random data?
>
>  
>
> I upgraded both my lab and production servers and upon upgrade have 
> lost SIP trunks, CTI Route Points, Device Pools and some phone 
> settings such as headset hookswitch settings. As I had completed a 
> backup beforehand I tried to restore it but those missing data bits 
> did not get restored. I rolled back to 7.1.2 and all those settings 
> are now there again.
>
>  
>
> The only thing I can think of is that I had installed the 7.1.5b in a 
> staged install to the inactive partition over a 3 week period as I 
> have 5 servers in the cluster. My understanding is that data on the 
> active partition will automatically get migrated over to the inactive 
> when the upgrade is performed.
>
>  
>
> This may be incorrect and if so is there a way to perform the upgrade 
> and then sync the missing information?
>
>  
>
> Karen
>
>
> Show Your RACQ Card & Save this September school holiday at AMF 
> Bowling Centres, Alma Park Zoo and Aussie World! Visit 
> www.racq.com.au/benefits <http://www.racq.com.au/benefits> for more 
> discount holiday ideas.
>
>
> Please Note: If you are not the intended recipient, please delete this 
> email as its use is prohibited. RACQ does not warrant or represent 
> that this email is free from viruses or defects. If you do not wish to 
> receive any further commercial electronic messages from RACQ please 
> e-mail unsubscribe at racq.com.au <mailto:unsubscribe at racq.com.au> or 
> contact RACQ on 13 19 05.
>
>
>  
> ------------------------------------------------------------------------
>
>
>   
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
> ------------------------------------------------------------------------
>
> 0ede5e1b-f.gif 
> <http://www.dimensiondata.com/_layouts/forms.aspx?FormID=204>
>
> *Disclaimer: This e-mail communication and any attachments may contain 
> confidential and privileged information and is for use by the 
> designated addressee(s) named above only. If you are not the intended 
> addressee, you are hereby notified that you have received this 
> communication in error and that any use or reproduction of this email 
> or its contents is strictly prohibited and may be unlawful. If you 
> have received this communication in error, please notify us 
> immediately by replying to this message and deleting it from your 
> computer. Thank you. *
>
>
> Show Your RACQ Card & Save this September school holiday at AMF 
> Bowling Centres, Alma Park Zoo and Aussie World! Visit 
> www.racq.com.au/benefits for more discount holiday ideas.
>
>
> Please Note: If you are not the intended recipient, please delete this 
> email as its use is prohibited. RACQ does not warrant or represent 
> that this email is free from viruses or defects. If you do not wish to 
> receive any further commercial electronic messages from RACQ please 
> e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100913/5ae40603/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1111 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100913/5ae40603/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 168 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100913/5ae40603/attachment.png>